Clear safety film that holds broken glass together, blocks over 99% of UV and stays almost invisible. Supply and installation across the UAE.
Safety window film is a layer of tough, clear polyester with a strong pressure-sensitive adhesive. It is applied to the inside of the glass. When the glass is hit or breaks on its own, the adhesive keeps the broken pieces stuck to the film, and the film keeps them in the frame. Instead of a shower of sharp shards, you get a cracked pane that stays in place.
The same product is sold under several names: safety film, anti-shatter film, security film, shatterproof film and glass protection film. Thicker films (measured in mil, where 1 mil is 0.0254 mm) give more strength.
Full details and test results: 4 mil safety film (EN 12600 Class 2(B)2), 8 mil safety film (EN 12600 Class 2(B)2) and 12 mil safety film (EN 12600 Class 1(B)1). See where we have installed them on our projects page.
| 4 Mil Clear Safety | 8 Mil Clear Safety | |
|---|---|---|
| Thickness | about 0.1 mm | about 0.2 mm |
| Tensile strength | 1,800 kg/cm² | 3,600 kg/cm² |
| Peel strength | 2,500 g/inch | 5,000 g/inch |
| UV block | over 99% | over 99% |
| Best for | Glass doors, partitions, homes and offices | Schools, shop fronts, ground floors and higher-risk glass |
Which should you choose? For most homes, glass doors and office partitions, 4 mil gives good protection against accidental breakage. Choose 8 mil where people are close to large glass, where glass is at ground level or easy to reach from outside, or where the building needs a higher level of protection.
Safety film does not make glass unbreakable, and it is not a bulletproof or blast-rated system on its own. The glass can still crack; the film keeps the pieces together. For higher security needs, thicker film and attachment systems that fix the film to the frame can be specified. We will tell you honestly what level your glass needs.
Clear safety film blocks UV but rejects little heat. If you want safety and a cooler room, choose a safety-grade reflective or charcoal combination film, or use solar control window film on the same glass. See also our privacy films.
We supply Global 4 mil and 8 mil clear safety film rolls from stock in the UAE to installers, glass companies and fit-out contractors, and export to Saudi Arabia, Oman, Qatar, Bahrain and Kuwait. See wholesale window film.
Dubai, Abu Dhabi and Al Ain, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. For large buildings see commercial and project window film.
Safety film (also called anti-shatter film or security film) is a thick, clear polyester film bonded to glass with a strong adhesive. If the glass breaks, the film holds the pieces together so sharp shards do not fall or fly.
No. The glass can still crack or break. Safety film keeps the broken pieces stuck together and in the frame, which reduces injuries and makes it harder to get through the glass quickly.
8 mil film is about twice as thick as 4 mil (about 0.2 mm vs 0.1 mm) and has roughly double the tensile and peel strength. 4 mil suits doors, partitions and homes; 8 mil suits schools, shop fronts, ground floors and higher-risk glass.
Clear safety film is almost invisible once installed. It does not change the look of the window and still blocks over 99% of UV rays.
Clear safety film blocks UV but rejects little heat. If you also need heat reduction, choose a safety-grade reflective or charcoal combination film, or pair safety film with solar control film.
Yes. It is often used on tempered glass to hold the pieces if the glass breaks unexpectedly. We check the glass type before installation and choose a suitable film.
Most homes and offices are done in one day. The film may look slightly hazy for a few days while the adhesive dries; avoid cleaning the glass for the first week.
Safety film is priced per square metre and depends on the thickness (4 mil or 8 mil), the total area and access. Send photos and rough sizes on WhatsApp for a quick quote, or book a free site survey.
Yes. We supply Global 4 mil and 8 mil clear safety film rolls to installers and dealers in the UAE and export to Saudi Arabia, Oman, Qatar and the wider GCC.
Read more: 8 mil safety film specifications, why offices need 4 mil safety film, the science behind safety and security film and our window film price guide.
Elite Window Films FZE supplies Global solar control, safety and automotive window films and PPF across the UAE and GCC, with supply-only for dealers and supply-and-installation for homes, offices and projects.
Business Centre, Sharjah Publishing City Free Zone, Sheikh Mohammed Bin Zayed Road, Sharjah Sharjah 111
Phone: +971 56 702 7879
Email: info@elitewindowfilms.com
Copyright© 2026 Elite Window Films FZE - All Rights Reserved.