Global Window Films and Elite Window Films logo
WhatsApp Chat
+971 56 702 7879

12 Mil Safety Window Film in Dubai and the UAE

Two-layer clear safety film tested to EN 12600 Class 1(B)1, the highest impact class. Supply and installation by Elite Window Films across the UAE.

In short: 12 mil safety window film is a clear two-layer polyester film about 0.3 mm thick, bonded to the inside of the glass. In independent pendulum impact tests by TÜV Rheinland, 4 mm glass with Global 12 mil film was classified EN 12600 Class 1(B)1 from both the glass side and the film side. Class 1 is the highest drop-height class (1,200 mm), and type B means the broken pieces stay held together, like laminated glass.

12 mil safety film specifications

PropertyGlobal 12 Mil Clear Safety Film
Thickness12 mil (about 0.3 mm), two layers
Impact classificationEN 12600 Class 1(B)1, glass side and film side (TÜV Rheinland, 4 mm glass)
Visible light transmitted88%
UV transmissionless than 1% (over 99% of UV blocked)
Total solar energy rejected17%
Tensile strength28,446 psi
Break strength340 lbs/in
Peel strength2,000 g/inch
Fire rating (declared)ASTM E84 Class A
ApplicationInterior surface of the glass

Optical figures are from the Global data sheet on 3 mm clear glass and vary with glass type. The impact classification is from TÜV Rheinland test reports 89224672-25 and -26. Ask us for the data sheet and test reports.

What the EN 12600 Class 1(B)1 result means

  • Class 1: the filmed glass met the standard at the highest pendulum drop height of 1,200 mm. 4 mil and 8 mil film were tested to Class 2 (450 mm).
  • Type B breakage: when the glass broke, the film held the fragments together, as laminated glass does.
  • Both faces: the result applies whether the impact comes from the glass side or the film side.

The result applies to the tested build-up: 4 mm glass with 12 mil film. Other glass types and sizes are not covered without further testing.

Where 12 mil film is used

  • Glass in schools, nurseries and hospitals where people may fall against it
  • Large glass doors, low glazing and glass near stairs
  • Ground-floor shop fronts and showroom glass
  • Government, banking and high-risk buildings

What 12 mil safety film does not do

  • It does not make glass unbreakable; it holds broken pieces together.
  • It is not bulletproof, and it is not a blast-rated system on its own.
  • Clear safety film rejects little solar heat. For heat control as well, add solar control film.

4 mil, 8 mil or 12 mil?

4 Mil8 Mil12 Mil
Thicknessabout 0.1 mmabout 0.2 mmabout 0.3 mm, two layers
EN 12600 class2(B)22(B)21(B)1
Peel strength2,500 g/inch5,000 g/inch2,000 g/inch
Typical usedoors, partitions, homes, officesschools, shop fronts, banks, ground floorshighest-risk glass, highest impact class

See 4 mil and 8 mil safety film.

Price and installation

12 mil safety film is quoted per square metre after a free site survey. The price depends on the area, the glass and the access. Most homes and offices are installed in one day.

12 mil safety film FAQ

Is 12 mil safety film stronger than 8 mil?

It is thicker and reached a higher EN 12600 impact class (Class 1 against Class 2). 8 mil film has higher tensile and peel strength figures, so the right choice depends on the glass and the risk. We advise after a survey.

Can you see 12 mil safety film?

It is clear, with 88% visible light transmission, so the glass looks almost the same.

Does 12 mil film block UV?

Yes. UV transmission is less than 1%.

Is 12 mil film bulletproof?

No. It holds broken glass together. It does not stop bullets.

Get a free safety film survey. WhatsApp photos of your glass to +971 56 702 7879 or email [email protected].
WhatsApp usBook a survey

Elite Window Films FZE, Business Centre, Sharjah Publishing City Free Zone, Sharjah. Authorised supplier of Global window films; we install directly in every emirate. Back to all safety film.

About Us

Elite Window Films FZE supplies Global solar control, safety and automotive window films and PPF across the UAE and GCC, with supply-only for dealers and supply-and-installation for homes, offices and projects.

Contact Us

Business Centre, Sharjah Publishing City Free Zone, Sheikh Mohammed Bin Zayed Road, Sharjah Sharjah 111

Phone: +971 56 702 7879

Email: info@elitewindowfilms.com

News Letter

Copyright© 2026 Elite Window Films FZE - All Rights Reserved.