12 mil clear safety window film holding broken glass together

12 Mil Clear Safety Film: Specs and EN 12600 Class 1 Result

November 07, 2026

12 Mil Clear Safety Film: Specs and EN 12600 Class 1 Result

Global 12 Mil Clear Safety Film is a two-layer clear safety film for the inside of glass. On 4 mm clear float glass, it was classified EN 12600 Class 1(B)1 by TÜV Rheinland, the highest drop-height class in that impact test, while letting through 88% of visible light.

What 12 mil safety film is

It is a thick, two-layer clear polyester film with a scratch-resistant surface, fitted to the interior side of the glass. If the glass breaks, the pieces stay stuck to the film instead of falling as loose, sharp shards.

Elite Window Films supplies and installs Global 12 mil film alongside the 4 mil and 8 mil versions for glass where you want the highest impact class in the range.

Independent impact test: EN 12600 Class 1(B)1

TÜV Rheinland Nederland B.V. (Notified Body 0336) tested 4 mm clear float glass with 12 mil Clear Safety Film to EN 12600, the European pendulum impact test for flat glass in buildings. It was classified 1(B)1 with impact from both the glass side and the film side (reports 89224672-25 and -26).

  • 1 means it met the test at all three drop heights, including the highest, 1,200 mm.
  • B means the glass cracked but the fragments stayed held together, the way laminated glass behaves.

The result applies to the glass and film combination tested. Full reports are available on request.

12 mil technical data

PropertyValue
Thickness12 mil, two layers
Tensile strength28,446 psi
Break strength340 lbs/inch
Elongation at break160%
Peel strength2,000 g/inch
Visible light transmitted*88%
UV transmission*less than 1%
Total solar energy rejected*17%
Solar heat gain coefficient*0.84
Abrasion (ASTM D1044, 100 cycles)haze increase 3.10 measured

*On 3 mm clear glass, from the Global technical data sheet.

4 mil vs 8 mil vs 12 mil

FilmThicknessEN 12600 on 4 mm glassLight inTypical use
4 mil Clear Safetyabout 0.1 mm2(B)286%Glass doors, partitions, homes and offices
8 mil Clear Safetyabout 0.2 mm2(B)287%Schools, shop fronts, ground floors
12 mil Clear Safety12 mil, two-layer1(B)188%Where the highest impact class is wanted

The 12 mil data sheet uses different test methods and units from the 4 mil and 8 mil sheets, so compare tensile and peel figures with care. The EN 12600 class is the like-for-like comparison.

What 12 mil film does not do

  • It does not make glass unbreakable. It holds broken glass together.
  • It is not bulletproof or blast-proof. We hold no blast test data for 12 mil film.
  • It rejects little heat, about 17% of solar energy. For heat control, pair it with a solar film or ask about other options.

Price and installation

12 mil film is priced per square metre after a free site survey, based on area, glass type and access. For 4 mil and 8 mil prices, see our window film price guide for Dubai. Installation details are on our safety window film Dubai page, and every film is compared in the Global window film specifications table.

FAQs

Is 12 mil safety film stronger than 8 mil?

On 4 mm glass, 12 mil reached EN 12600 Class 1(B)1, and 8 mil reached Class 2(B)2. Class 1 means it passed the highest drop height in the test.

Will 12 mil film make my windows look darker?

No. It is clear and lets through 88% of visible light on clear glass.

Does 12 mil film block UV?

Yes. UV transmission is less than 1%.

Is 12 mil film bulletproof?

No. No window film makes glass bulletproof or unbreakable.

Can I see the test reports?

Yes. Ask us on WhatsApp or by email and we will send the full TÜV Rheinland reports.

Elite Window Films FZE
Business Centre, Sharjah Publishing City Free Zone, Sharjah
Phone and WhatsApp: +971 56 702 7879
Email: [email protected]

Back to Blog