
Global Window Film Specifications: UAE Comparison Table
Global Window Film Specifications: UAE Comparison Table
This page lists the published technical data for every Global window film that Elite Window Films supplies and installs in the UAE: safety films, spectrally selective films, Nichrome films and reflective films. All figures come from the Global technical data sheets. Solar figures are for the film on 6 mm (1/4 inch) single-pane clear glass unless stated otherwise.
Elite Window Films FZE is an authorised supplier of Global window films, based in Sharjah and serving Dubai, Abu Dhabi, Al Ain and the Northern Emirates.
How to read the numbers
- VLT (visible light transmitted): how much daylight comes through. Higher means brighter and clearer.
- TSER (total solar energy rejected): how much of the sun's energy is kept out. Higher means less heat.
- SHGC (solar heat gain coefficient): the share of solar heat that gets in, from 0 to 1. Lower is better.
- Glare reduction: how much brightness is cut compared with the bare glass.
- UV: every film on this page blocks over 99% of UV.
Bare 6 mm clear glass on its own has a VLT of 88%, TSER of 18% and SHGC of 0.82, and blocks 43% of UV. Results change on tinted or double-glazed glass, so we check your glass before recommending a film.
Solar control films: interior
| Film | VLT % | TSER % | SHGC | Glare cut % | Look |
|---|---|---|---|---|---|
| SSF 70 Interior (spectrally selective) | 68 | 55 | 0.45 | 23 | Light, low reflection |
| SSF 50 Interior (spectrally selective) | 52 | 61 | 0.39 | 41 | Medium, low reflection |
| Reflective Silver 50 (RS 50) | 47 | 53 | 0.47 | 47 | Silver reflective |
| Reflective Silver 35 (RS 35) | 35 | 63 | 0.37 | 60 | Silver reflective |
| Nichrome 35 | 33 | 57 | 0.43 | 63 | Medium neutral metallic |
| Nichrome 20 | 20 | 68 | 0.32 | 77 | Dark neutral metallic |
| Reflective Silver 20 (RS 20) | 17 | 78 | 0.22 | 81 | Silver mirror |
| Reflective Blue 15 | 12 | 74 | 0.26 | 86 | Blue reflective |
Solar control films: exterior
Exterior films go on the outside of the glass. They suit skylights, curtain walls and many double-glazed units where an interior film could heat up the sealed unit.
| Film | VLT % | TSER % | SHGC | Glare cut % | Look |
|---|---|---|---|---|---|
| SSF 70 Exterior (spectrally selective, 3 mil) | 69 | 48 | 0.52 | 22 | Light, low reflection |
| SSF 55 Exterior (spectrally selective, 3 mil) | 53 | 57 | 0.43 | 40 | Medium, low reflection |
| Nichrome 35 EXT | 33 | 59 | 0.41 | 63 | Medium neutral metallic |
| Nichrome 20 EXT | 21 | 69 | 0.31 | 76 | Dark neutral metallic |
| Reflective Silver 20 Exterior (RS 20X) | 19 | 81 | 0.19 | 78 | Silver mirror |
| Reflective Silver 15 Exterior (RS 15X) | 14 | 85 | 0.15 | 84 | Silver mirror |
On double-glazed clear glass, the figures change. For example, RS 15X rejects 89% of solar energy and RS 20X rejects 84%. On a mall skylight in Al Ain, heat measured through the glass dropped from 183 W/m² to 16–17 W/m² after Reflective Silver 15 Exterior was installed.
Safety and security films
| Film | Thickness | Tensile strength | Peel strength | Elongation | VLT % | EN 12600 class |
|---|---|---|---|---|---|---|
| 4 mil Clear Safety | about 0.1 mm | 1,800 kg/cm² (25,600 psi) | 2,500 g/inch | 130% | 86 | 2(B)2 |
| 8 mil Clear Safety | about 0.2 mm | 3,600 kg/cm² (51,200 psi) | 5,000 g/inch | 260% | 87 | 2(B)2 |
| 8 mil Clear Exterior | about 0.2 mm | 3,600 kg/cm² (51,200 psi) | 5,000 g/inch | 260% | 87 | See note |
| 12 mil Clear Safety (two-layer) | 12 mil | 28,446 psi | 2,000 g/inch | 160% | 88* | 1(B)1 |
*12 mil figure is on 3 mm clear glass. The 12 mil data sheet uses different test units, so compare its numbers with care.
All four safety films block over 99% of UV. Clear safety film rejects little heat (about 17–18% TSER on clear glass, much the same as bare glass). If you need safety and heat control together, ask about the 3 mil SSF Exterior films, which combine solar control with glass fragment retention, or pair safety film with a solar film.
Independent impact test results
Glass fitted with Global safety film was tested by TÜV Rheinland Nederland B.V. (Notified Body 0336) to EN 12600, the European pendulum impact test for flat glass in buildings:
- 4 mil Clear Safety Film on 4 mm clear float glass: Class 2(B)2, impact from both the glass side and the film side (reports 89224672-17 and -18).
- 8 mil Clear Safety Film on 4 mm clear float glass: Class 2(B)2, both sides (reports 89224672-21 and -22).
- 12 mil Clear Safety Film on 4 mm clear float glass: Class 1(B)1, both sides (reports 89224672-25 and -26). Class 1 is the highest drop height in the test (1,200 mm).
What the code means: the first number is the highest impact level passed (Class 2 = 450 mm drop, Class 1 = 1,200 mm drop). "B" means the glass cracked but the pieces stayed held together, the way laminated glass behaves.
These results apply to the glass and film combination tested. The 8 mil Clear Exterior version uses the same 8 mil film with an exterior hard coat. Ask us before relying on the EN 12600 result for an exterior installation.
Security and blast testing: what was tested, and the limits
EN 356 (manual attack): 4 mm glass with the tinted 8 mil Solar Safety Film reached EN 356 P1A (report 89224672-30). P1A is the lowest category in that standard, where a 4.11 kg steel ball is dropped from 1.5 m three times. The clear 8 mil film was not tested to EN 356.
Blast range test (2005): In an explosion range trial at Spadeadam, UK (report GDA/71-1701s), one test window of 6 mm annealed glass with 8 mil two-ply safety film and a bolted metal edge-retention system was rated Low Hazard (ISO) and GSA 3A against a 100 kg TNT-equivalent charge at 31 m. The report itself states that a single sample is not a certification. The result depended on the edge-retention system, and a normal installation without anchoring was not tested.
No window film makes glass unbreakable, bulletproof or blast-proof. Safety film holds broken glass together and reduces the risk from flying fragments.
Warranty and supply
Every installation comes with a written warranty. Terms depend on the product: up to 10 years for interior films and up to 7 years for exterior films (up to 5 years for 8 mil Clear Exterior). Rolls are available in 48, 60 and 72 inch widths for installers and contractors.
For prices per square metre, see our window film price guide for Dubai. For safety film installation, see safety window film in Dubai, and for buildings, commercial window film in the UAE.
FAQs
Which Global film rejects the most heat?
Reflective Silver 15 Exterior, with 85% total solar energy rejected on single clear glass and up to 90% on double-glazed tinted glass. It is a mirror film, so it changes the look of the building.
Which film keeps the most daylight while cutting heat?
SSF 70 Interior lets through 68% of visible light and rejects 55% of solar energy on single clear glass, with low reflection.
Is Global safety film tested?
Yes. TÜV Rheinland classified 4 mil and 8 mil film on 4 mm glass as EN 12600 Class 2(B)2, and 12 mil film as Class 1(B)1. The full reports are available from us.
Does reflective film give privacy at night?
No. Reflective films give daytime privacy. At night, with lights on inside, people can see in. Use curtains, blinds or frosted film where night privacy matters.
Can these films go on double glazing?
Often yes, but not every film suits every sealed unit. We check the glass first and use exterior film where an interior film could cause heat stress.
Can I get the full data sheets and test reports?
Yes. Ask on WhatsApp or by email and we will send the full documents for the film you are considering.
Elite Window Films FZE
Business Centre, Sharjah Publishing City Free Zone, Sharjah
Phone and WhatsApp: +971 56 702 7879
Email: [email protected]